Guide · 7 min read

How to Convert a Scanned Floor Plan to CAD

You have a floor plan, but only as a scan: a TIFF from the county archive, a JPG from the owner, or a PDF that turns out to be a picture. You need it in CAD — to remodel, to run a layout, or to hand it to another trade. The problem is that a scan is a grid of pixels. CAD needs lines, polylines and layers. This guide covers the three realistic ways to bridge that gap, and how to avoid the mistakes that cost the most time.

An architectural scale laid along a wall on a penciled floor plan.

First, check what you actually have

Before converting anything, open the file and zoom in to 400%.

Also note the resolution. A plan scanned at 300 DPI or more converts far better than a 96 DPI screenshot. If the original paper still exists, rescanning it is often the single best improvement you can make.

Option 1: Retrace by hand over the scan

The classic method: insert the image in your CAD drawing (IMAGEATTACH in AutoCAD), scale it, lock it on its own layer, and redraw every wall on top.

  1. Attach the image and send it to a locked REF_SCAN layer.
  2. Find a long, reliable dimension on the plan (an overall building length is best).
  3. Use SCALE with the Reference option to stretch the image so that dimension matches its real value.
  4. Redraw walls, openings and fixtures on proper layers.

Pros: full control, clean result. Cons: a single-family floor plan easily takes a few hours; a commercial floor takes days.

Option 2: Use a generic raster-to-vector converter

Tools that convert any image to vectors trace the edge of every dark pixel. On a floor plan, that means each wall becomes two wobbly outlines, text becomes hundreds of tiny shapes, and hatching explodes into noise. You get "vectors", but cleaning them up can take longer than redrawing. These tools work well for logos and simple line art, less well for architecture.

Option 3: AI vectorization with review

Newer tools are trained on floor plans specifically. Instead of tracing pixels, they try to recognize what is drawn: a wall, a door swing, a window. The output is closer to what a drafter would draw — center lines or wall outlines on dedicated layers.

No AI gets every plan right, especially old, stained or hand-drawn ones. That is why the review step matters: the best workflow is AI draft first, human correction second, export last. Raster2Draft is built around exactly that loop, with the correction step in the browser before you download a DXF.

Getting the scale right (the step people skip)

A scan has no real-world units. Whichever method you use, calibrate against a known dimension — not against the graphic scale bar alone, which can be distorted by photocopying. Then check a second dimension in the other direction. If X is right and Y is off by 2–3%, the scan is stretched; fix that before drawing anything else.

Rule of thumb: calibrate on the longest dimension you trust, verify on a perpendicular one.

Which method should you choose?

Try AI vectorization on your own plans

Raster2Draft turns scanned floor plans into layered DXF drawings you can correct in your browser. We are opening early access in the US.

Get early access